Vancouver Commercial Painter Tips – Painting Your Warehouse

source: greektravel.com via google images

source: greektravel.com via google images


Painting your warehouse to make it look decent and well-kept requires technique and careful planning. Some of the things that you should remember in terms of properly painting your warehouse would be:

  • Lapmarks: Refers to the unpleasant stripes caused by uneven layers of paint. This happens when you paint walls that already have paint on them and already have dried. This creates an uneven surface. The best way to avoid this is to start in one corner and roll the paint from top to bottom with only slightly moving to retouch the other parts of the walls. Make it a point to not let he paint on the roller get dry and dip it in paint as often as you can.
  • Tapes: Do not just pull away the tapes that are covering the walls when the paint has become dry because this may damage the paint underneath it. If you are already done and you want to remove the tapes then what you can do is to gently cut it loose with a sharp utility knife or box cutter. When you are cutting, pull the tape at a 45-degree angle.
  • Trim: There is a step by step procedure when it comes to painting your warehouse and what professionals do is to paint the trim first followed by the ceiling and then the walls. The reason behind this is because it is easier and faster to remove the tape off the trim as compared to the walls. Just keep in mind that when you are painting the trim just focus on getting a smooth result on the wood and let the paint dry for 24 hours.

These are a few of the things that you should consider if you are planning to hire people like house painters Vancouver from the Vancouver painting company. Having this knowledge will help you as well as them to accomplish the results you are looking for.